1 open source board using the XC7Z010CLG400
Real designs built with the XC7Z010CLG400, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
StanlazyThe XC7Z010CLG400 in open source designs
The gallery holds 1 open source boards using the XC7Z010CLG400 from 1 GitHub repository; a typical one measures about 88 × 23.4 mm and carries around 217 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is ZYNQ Ruler by Stanlazy.
Microcontrollers on boards using the XC7Z010CLG400
XC7Z010CLG400: common questions
Where can I find a XC7Z010CLG400 reference design?
Each of the 1 boards on this page is a real design using the XC7Z010CLG400. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the XC7Z010CLG400 use?
Most are built on FPGA (1).
How big is a typical board using the XC7Z010CLG400?
The median is 88 × 23.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the XC7Z010CLG400?
By GitHub stars, ZYNQ Ruler by Stanlazy, with 17 stars.
Can I simulate one of these boards using the XC7Z010CLG400 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.