3 open source boards using the ADS131M03QPWRQ1

Real designs built with the ADS131M03QPWRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filtersOpen license only|Most starred Recently updated Most components

The ADS131M03QPWRQ1 in open source designs

The gallery holds 3 open source boards using the ADS131M03QPWRQ1 from 1 GitHub repository; a typical one measures about 165.1 × 69.8 mm and carries around 43 components.

67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Fin prototype by Helios-Rocket.

Microcontrollers on boards using the ADS131M03QPWRQ1

STM32 3

ADS131M03QPWRQ1: common questions

Where can I find a ADS131M03QPWRQ1 reference design?

Each of the 3 boards on this page is a real design using the ADS131M03QPWRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ADS131M03QPWRQ1 use?

Most are built on STM32 (3).

How big is a typical board using the ADS131M03QPWRQ1?

The median is 165.1 × 69.8 mm, and 67% are two-layer designs.

What is the most popular open source board using the ADS131M03QPWRQ1?

By GitHub stars, Fin prototype by Helios-Rocket, with 1 stars.

Can I simulate one of these boards using the ADS131M03QPWRQ1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.