4 open source boards using the AP2204R-5.0TRG1
Real designs built with the AP2204R-5.0TRG1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
DoublePanel MouseBites
M-Scholli
48 × 34 mm12 parts2LApache-2.04
DoublePanel VCut
48 × 34 mm12 parts2LApache-2.04
Panel
24 × 34 mm12 parts2LApache-2.04
Panel PanelPCBkicad pro
48 × 34 mm12 parts2LApache-2.04
The AP2204R-5.0TRG1 in open source designs
The gallery holds 4 open source boards using the AP2204R-5.0TRG1 from 1 GitHub repository; a typical one measures about 48 × 34 mm and carries around 12 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is DoublePanel MouseBites by M-Scholli.
AP2204R-5.0TRG1: common questions
Where can I find a AP2204R-5.0TRG1 reference design?
Each of the 4 boards on this page is a real design using the AP2204R-5.0TRG1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the AP2204R-5.0TRG1?
The median is 48 × 34 mm, and 100% are two-layer designs.
What is the most popular open source board using the AP2204R-5.0TRG1?
By GitHub stars, DoublePanel MouseBites by M-Scholli, with 4 stars.
Can I simulate one of these boards using the AP2204R-5.0TRG1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.