1 open source board using the AP7313-18SAG-7
Real designs built with the AP7313-18SAG-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
mpvanoThe AP7313-18SAG-7 in open source designs
The gallery holds 1 open source boards using the AP7313-18SAG-7 from 1 GitHub repository; a typical one measures about 85 × 56 mm and carries around 153 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Radiohat 2.0 Preliminary (not a Hat) by mpvano.
What boards using the AP7313-18SAG-7 are built for
AP7313-18SAG-7: common questions
Where can I find a AP7313-18SAG-7 reference design?
Each of the 1 boards on this page is a real design using the AP7313-18SAG-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the AP7313-18SAG-7?
The median is 85 × 56 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP7313-18SAG-7?
By GitHub stars, Radiohat 2.0 Preliminary (not a Hat) by mpvano, with 2 stars.
Can I simulate one of these boards using the AP7313-18SAG-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.