1 open source board using the CH32X05
Real designs built with the CH32X05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
mothenjoyer69The CH32X05 in open source designs
The gallery holds 1 open source boards using the CH32X05 from 1 GitHub repository; a typical one measures about 100.4 × 92.9 mm and carries around 84 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Cm4-printing deck by mothenjoyer69.
Microcontrollers on boards using the CH32X05
CH32X05: common questions
Where can I find a CH32X05 reference design?
Each of the 1 boards on this page is a real design using the CH32X05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CH32X05 use?
Most are built on Raspberry Pi (1).
How big is a typical board using the CH32X05?
The median is 100.4 × 92.9 mm, and 0% are two-layer designs.
What is the most popular open source board using the CH32X05?
By GitHub stars, Cm4-printing deck by mothenjoyer69, with 1 stars.
Can I simulate one of these boards using the CH32X05 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.