1 open source board using the DNP-MCP1700-12
Real designs built with the DNP-MCP1700-12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
jaromir-sukubaThe DNP-MCP1700-12 in open source designs
The gallery holds 1 open source boards using the DNP-MCP1700-12 from 1 GitHub repository; a typical one measures about 175 × 103 mm and carries around 219 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Rnvm homer by jaromir-sukuba.
Microcontrollers on boards using the DNP-MCP1700-12
What boards using the DNP-MCP1700-12 are built for
DNP-MCP1700-12: common questions
Where can I find a DNP-MCP1700-12 reference design?
Each of the 1 boards on this page is a real design using the DNP-MCP1700-12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DNP-MCP1700-12 use?
Most are built on FPGA (1).
How big is a typical board using the DNP-MCP1700-12?
The median is 175 × 103 mm, and 100% are two-layer designs.
What is the most popular open source board using the DNP-MCP1700-12?
By GitHub stars, Rnvm homer by jaromir-sukuba, with 459 stars.
Can I simulate one of these boards using the DNP-MCP1700-12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.