2 open source boards using the EZ80F92AZ020EG(LQFP100)

Real designs built with the EZ80F92AZ020EG(LQFP100), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The EZ80F92AZ020EG(LQFP100) in open source designs

The gallery holds 2 open source boards using the EZ80F92AZ020EG(LQFP100) from 1 GitHub repository; a typical one measures about 106.1 × 64.9 mm and carries around 237 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is AgonLight2 Rev A by OLIMEX.

Microcontrollers on boards using the EZ80F92AZ020EG(LQFP100)

RP2040/RP2350 2

What boards using the EZ80F92AZ020EG(LQFP100) are built for

EZ80F92AZ020EG(LQFP100): common questions

Where can I find a EZ80F92AZ020EG(LQFP100) reference design?

Each of the 2 boards on this page is a real design using the EZ80F92AZ020EG(LQFP100). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the EZ80F92AZ020EG(LQFP100) use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the EZ80F92AZ020EG(LQFP100)?

The median is 106.1 × 64.9 mm, and 0% are two-layer designs.

What is the most popular open source board using the EZ80F92AZ020EG(LQFP100)?

By GitHub stars, AgonLight2 Rev A by OLIMEX, with 105 stars.

Can I simulate one of these boards using the EZ80F92AZ020EG(LQFP100) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.