2 open source boards using the Infineon SLB 9672AU2.0
Real designs built with the Infineon SLB 9672AU2.0, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Observer
Stab-Rabbit-coding
69.9 × 56.4 mm43 parts4LCERN-OHL-W-2.01
CAN-PERIPH-GW-1 / MAL-CAN-PERIPH-GW
64.3 × 19.5 mm39 parts2LCERN-OHL-W-2.01
The Infineon SLB 9672AU2.0 in open source designs
The gallery holds 2 open source boards using the Infineon SLB 9672AU2.0 from 1 GitHub repository; a typical one measures about 67.1 × 38 mm and carries around 41 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Observer by Stab-Rabbit-coding.
Infineon SLB 9672AU2.0: common questions
Where can I find a Infineon SLB 9672AU2.0 reference design?
Each of the 2 boards on this page is a real design using the Infineon SLB 9672AU2.0. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the Infineon SLB 9672AU2.0?
The median is 67.1 × 38 mm, and 50% are two-layer designs.
What is the most popular open source board using the Infineon SLB 9672AU2.0?
By GitHub stars, Observer by Stab-Rabbit-coding, with 1 stars.
Can I simulate one of these boards using the Infineon SLB 9672AU2.0 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.