2 open source boards using the LM2937IMP-3.3
Real designs built with the LM2937IMP-3.3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAMWPT TX
mark-belbin
100 × 45 mm117 parts4LGPL-3.073
WPT RX
100 × 45 mm51 parts4LGPL-3.073
The LM2937IMP-3.3 in open source designs
The gallery holds 2 open source boards using the LM2937IMP-3.3 from 1 GitHub repository; a typical one measures about 100 × 45 mm and carries around 84 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is WPT TX by mark-belbin.
Microcontrollers on boards using the LM2937IMP-3.3
What boards using the LM2937IMP-3.3 are built for
LM2937IMP-3.3: common questions
Where can I find a LM2937IMP-3.3 reference design?
Each of the 2 boards on this page is a real design using the LM2937IMP-3.3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM2937IMP-3.3 use?
Most are built on Microchip SAM (1).
How big is a typical board using the LM2937IMP-3.3?
The median is 100 × 45 mm, and 0% are two-layer designs.
What is the most popular open source board using the LM2937IMP-3.3?
By GitHub stars, WPT TX by mark-belbin, with 73 stars.
Can I simulate one of these boards using the LM2937IMP-3.3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.