2 open source boards using the MCP3002-I/MS
Real designs built with the MCP3002-I/MS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Progcc 3.2 main
HandHeldLegend
110.9 × 59.8 mm128 parts4LNo license6
RP2040/RP2350Procon gcc main
110.9 × 59.8 mm113 parts4LNo license6
The MCP3002-I/MS in open source designs
The gallery holds 2 open source boards using the MCP3002-I/MS from 1 GitHub repository; a typical one measures about 110.9 × 59.8 mm and carries around 121 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Progcc 3.2 main by HandHeldLegend.
Microcontrollers on boards using the MCP3002-I/MS
MCP3002-I/MS: common questions
Where can I find a MCP3002-I/MS reference design?
Each of the 2 boards on this page is a real design using the MCP3002-I/MS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP3002-I/MS use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the MCP3002-I/MS?
The median is 110.9 × 59.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP3002-I/MS?
By GitHub stars, Progcc 3.2 main by HandHeldLegend, with 6 stars.
Can I simulate one of these boards using the MCP3002-I/MS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.