6 open source boards using the MIC37100-3.3WS
Real designs built with the MIC37100-3.3WS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32SDM-24 Data Logger
sundevilmotorsports
101 × 75 mm110 parts4LNo license2
ESP32Dash
130 × 81 mm105 parts4LNo license2
ESP32SDM26 SteeringWheel V1.1
182.9 × 134 mm82 parts4LNo license2
STM32SDM-25 Wheel Board
49 × 41 mm53 parts4LNo license2
STM32SDM25 IMU STM32
32.9 × 46.7 mm39 parts4LNo license2
STM32Telemetry STM32 V3
92 × 52.8 mm37 parts4LNo license2
The MIC37100-3.3WS in open source designs
The gallery holds 6 open source boards using the MIC37100-3.3WS from 1 GitHub repository; a typical one measures about 96.5 × 63.9 mm and carries around 68 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is SDM-24 Data Logger by sundevilmotorsports.
What boards using the MIC37100-3.3WS are built for
MIC37100-3.3WS: common questions
Where can I find a MIC37100-3.3WS reference design?
Each of the 6 boards on this page is a real design using the MIC37100-3.3WS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC37100-3.3WS use?
Most are built on STM32 (4) and ESP32 (2).
How big is a typical board using the MIC37100-3.3WS?
The median is 96.5 × 63.9 mm, and 0% are two-layer designs.
What is the most popular open source board using the MIC37100-3.3WS?
By GitHub stars, SDM-24 Data Logger by sundevilmotorsports, with 2 stars.
Can I simulate one of these boards using the MIC37100-3.3WS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.