2 open source boards using the NAND_K9GAG08
Real designs built with the NAND_K9GAG08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
A13 test project
servomouse
80 × 50 mm145 parts4LNo license1
A13 test project planar bkp
50 × 50 mm113 parts4LNo license1
The NAND_K9GAG08 in open source designs
The gallery holds 2 open source boards using the NAND_K9GAG08 from 1 GitHub repository; a typical one measures about 65 × 50 mm and carries around 129 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is A13 test project by servomouse.
NAND_K9GAG08: common questions
Where can I find a NAND_K9GAG08 reference design?
Each of the 2 boards on this page is a real design using the NAND_K9GAG08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the NAND_K9GAG08?
The median is 65 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the NAND_K9GAG08?
By GitHub stars, A13 test project by servomouse, with 1 stars.
Can I simulate one of these boards using the NAND_K9GAG08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.