2 open source boards using the Pololu_D24V10F5

Real designs built with the Pololu_D24V10F5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The Pololu_D24V10F5 in open source designs

The gallery holds 2 open source boards using the Pololu_D24V10F5 from 1 GitHub repository; a typical one measures about 91 × 124 mm and carries around 86 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is EWS RevH by jhbryan0817-del.

Microcontrollers on boards using the Pololu_D24V10F5

ESP32 2

What boards using the Pololu_D24V10F5 are built for

Pololu_D24V10F5: common questions

Where can I find a Pololu_D24V10F5 reference design?

Each of the 2 boards on this page is a real design using the Pololu_D24V10F5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the Pololu_D24V10F5 use?

Most are built on ESP32 (2).

How big is a typical board using the Pololu_D24V10F5?

The median is 91 × 124 mm, and 0% are two-layer designs.

What is the most popular open source board using the Pololu_D24V10F5?

By GitHub stars, EWS RevH by jhbryan0817-del, with 0 stars.

Can I simulate one of these boards using the Pololu_D24V10F5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.