2 open source boards using the SN74AUP1G74RSER

Real designs built with the SN74AUP1G74RSER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The SN74AUP1G74RSER in open source designs

The gallery holds 2 open source boards using the SN74AUP1G74RSER from 1 GitHub repository; a typical one measures about 70 × 70 mm and carries around 195 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is BAGEL Switch MK1.1 by ISSUIUC.

Microcontrollers on boards using the SN74AUP1G74RSER

STM32 2

What boards using the SN74AUP1G74RSER are built for

Sensors 2

SN74AUP1G74RSER: common questions

Where can I find a SN74AUP1G74RSER reference design?

Each of the 2 boards on this page is a real design using the SN74AUP1G74RSER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SN74AUP1G74RSER use?

Most are built on STM32 (2).

How big is a typical board using the SN74AUP1G74RSER?

The median is 70 × 70 mm, and 0% are two-layer designs.

What is the most popular open source board using the SN74AUP1G74RSER?

By GitHub stars, BAGEL Switch MK1.1 by ISSUIUC, with 31 stars.

Can I simulate one of these boards using the SN74AUP1G74RSER before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.