2 open source boards using the STM32F030-20
Real designs built with the STM32F030-20, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Led spot
ervanalb
50 × 49.8 mm49 parts4LNo license8
STM32Led spot old
50 × 50 mm45 parts4LNo license8
The STM32F030-20 in open source designs
The gallery holds 2 open source boards using the STM32F030-20 from 1 GitHub repository; a typical one measures about 50 × 49.9 mm and carries around 47 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Led spot by ervanalb.
Microcontrollers on boards using the STM32F030-20
STM32F030-20: common questions
Where can I find a STM32F030-20 reference design?
Each of the 2 boards on this page is a real design using the STM32F030-20. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F030-20 use?
Most are built on STM32 (2).
How big is a typical board using the STM32F030-20?
The median is 50 × 49.9 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32F030-20?
By GitHub stars, Led spot by ervanalb, with 8 stars.
Can I simulate one of these boards using the STM32F030-20 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.