1 open source board using the TEENSY_3.1_TW
Real designs built with the TEENSY_3.1_TW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
rhinoceroseThe TEENSY_3.1_TW in open source designs
The gallery holds 1 open source boards using the TEENSY_3.1_TW from 1 GitHub repository; a typical one measures about 107 × 20 mm and carries around 53 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is RadioMusic F rev2-2 by rhinocerose.
Microcontrollers on boards using the TEENSY_3.1_TW
What boards using the TEENSY_3.1_TW are built for
TEENSY_3.1_TW: common questions
Where can I find a TEENSY_3.1_TW reference design?
Each of the 1 boards on this page is a real design using the TEENSY_3.1_TW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TEENSY_3.1_TW use?
Most are built on NXP (1).
How big is a typical board using the TEENSY_3.1_TW?
The median is 107 × 20 mm, and 100% are two-layer designs.
What is the most popular open source board using the TEENSY_3.1_TW?
By GitHub stars, RadioMusic F rev2-2 by rhinocerose, with 0 stars.
Can I simulate one of these boards using the TEENSY_3.1_TW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.