1 open source board using the Teensy4.1_bare
Real designs built with the Teensy4.1_bare, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ISSUIUCThe Teensy4.1_bare in open source designs
The gallery holds 1 open source boards using the Teensy4.1_bare from 1 GitHub repository; a typical one measures about 100 × 80 mm and carries around 70 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is SPARK Pyrotechnic Testing Board by ISSUIUC.
Microcontrollers on boards using the Teensy4.1_bare
What boards using the Teensy4.1_bare are built for
Teensy4.1_bare: common questions
Where can I find a Teensy4.1_bare reference design?
Each of the 1 boards on this page is a real design using the Teensy4.1_bare. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Teensy4.1_bare use?
Most are built on NXP (1).
How big is a typical board using the Teensy4.1_bare?
The median is 100 × 80 mm, and 100% are two-layer designs.
What is the most popular open source board using the Teensy4.1_bare?
By GitHub stars, SPARK Pyrotechnic Testing Board by ISSUIUC, with 31 stars.
Can I simulate one of these boards using the Teensy4.1_bare before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.