2 open source boards using the TVS1801DRBR

Real designs built with the TVS1801DRBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The TVS1801DRBR in open source designs

The gallery holds 2 open source boards using the TVS1801DRBR from 1 GitHub repository; a typical one measures about 76 × 50.3 mm and carries around 147 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is CM4ClusterHat by will127534.

Microcontrollers on boards using the TVS1801DRBR

TVS1801DRBR: common questions

Where can I find a TVS1801DRBR reference design?

Each of the 2 boards on this page is a real design using the TVS1801DRBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TVS1801DRBR use?

Most are built on Raspberry Pi (1) and RP2040/RP2350 (1).

How big is a typical board using the TVS1801DRBR?

The median is 76 × 50.3 mm, and 0% are two-layer designs.

What is the most popular open source board using the TVS1801DRBR?

By GitHub stars, CM4ClusterHat by will127534, with 95 stars.

Can I simulate one of these boards using the TVS1801DRBR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.