2 open source boards using the 74LVC1G08
Real designs built with the 74LVC1G08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiOwl driver board-16
geezacoleman
234.4 × 56 mm445 parts4LMIT13
Raspberry PiPanel-16
250.4 × 131 mm445 parts4LMIT13
The 74LVC1G08 in open source designs
The gallery holds 2 open source boards using the 74LVC1G08 from 1 GitHub repository; a typical one measures about 242.4 × 93.5 mm and carries around 445 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Panel-16 by geezacoleman.
Microcontrollers on boards using the 74LVC1G08
74LVC1G08: common questions
Where can I find a 74LVC1G08 reference design?
Each of the 2 boards on this page is a real design using the 74LVC1G08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 74LVC1G08 use?
Most are built on Raspberry Pi (2).
How big is a typical board using the 74LVC1G08?
The median is 242.4 × 93.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the 74LVC1G08?
By GitHub stars, Panel-16 by geezacoleman, with 13 stars.
Can I simulate one of these boards using the 74LVC1G08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.