4 open source boards using the AP62600SJ-7
Real designs built with the AP62600SJ-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 160 parts
Lpddr4-test board
antmicro
160 partsApache-2.051 
Raspberry PiPintry
icamaster
100 × 100 mm166 parts4LMIT26
FPGAFast open switch r1.0
PCB-Arts
230 × 225 mm909 parts12LNo license14
RP2040/RP2350Bottom board palmtop
ZeroPhone
110 × 89 mm327 parts2LCERN-OHL-S-2.02
The AP62600SJ-7 in open source designs
The gallery holds 4 open source boards using the AP62600SJ-7 from 4 GitHub repositories; a typical one measures about 110 × 100 mm and carries around 247 components.
67% use four copper layers or more, and 75% carry an open source license.
The most starred is Lpddr4-test board by antmicro.
Microcontrollers on boards using the AP62600SJ-7
What boards using the AP62600SJ-7 are built for
AP62600SJ-7: common questions
Where can I find a AP62600SJ-7 reference design?
Each of the 4 boards on this page is a real design using the AP62600SJ-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP62600SJ-7 use?
Most are built on FPGA (1), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the AP62600SJ-7?
The median is 110 × 100 mm, and 33% are two-layer designs.
What is the most popular open source board using the AP62600SJ-7?
By GitHub stars, Lpddr4-test board by antmicro, with 51 stars.
Can I simulate one of these boards using the AP62600SJ-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.