1 open source board using the AT42QT1010-TSHR
Real designs built with the AT42QT1010-TSHR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PlumPot55The AT42QT1010-TSHR in open source designs
The gallery holds 1 open source boards using the AT42QT1010-TSHR from 1 GitHub repository; a typical one measures about 129.5 × 58.5 mm and carries around 37 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is MK7 Gripper by PlumPot55.
Microcontrollers on boards using the AT42QT1010-TSHR
AT42QT1010-TSHR: common questions
Where can I find a AT42QT1010-TSHR reference design?
Each of the 1 boards on this page is a real design using the AT42QT1010-TSHR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AT42QT1010-TSHR use?
Most are built on AVR/Arduino (1).
How big is a typical board using the AT42QT1010-TSHR?
The median is 129.5 × 58.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the AT42QT1010-TSHR?
By GitHub stars, MK7 Gripper by PlumPot55, with 15 stars.
Can I simulate one of these boards using the AT42QT1010-TSHR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.