9 open source boards using the AT42QT1010-TSHR

Real designs built with the AT42QT1010-TSHR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the AT42QT1010-TSHR

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the AT42QT1010-TSHR connects to, and the resistors, capacitors and other passives placed on it.

  • The SNSK pin has a series capacitor on 7 of 8 designs, most often 10 nF (then 22 nF).
  • The SNS pin has a series capacitor on 7 of 8 designs, most often 10 nF (then 22 nF).
  • The SNSK pin has a series resistor on 6 of 8 designs, most often 499 Ω (then 0 Ω).
  • The VDD pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 10 nF).
VSSpin 2Connected to: GND 78%
SNSKpin 3Connected to: Signal 88%
  • Series capacitor on 88% · 10 nF (6), 22 nF (1)
  • Series resistor on 75% · 499 Ω (3), 0 Ω (1), 1 kΩ (1)
SNSpin 4Connected to: Signal 89%
  • Series capacitor on 88% · 10 nF (6), 22 nF (1)
VDDpin 5Connected to: 5V 67% · a signal 22%
  • Decoupling capacitor on 63% · 100 nF (6), 10 nF (1), 1 nF (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include QI Charger by drewsum, Sentinel arduino firmware by YousefAliAicha, IV-6 Display Board by drewsum and Nodi by feboyfierlyan.

The AT42QT1010-TSHR in open source designs

The gallery holds 9 open source boards using the AT42QT1010-TSHR from 9 GitHub repositories; a typical one measures about 160.1 × 54 mm and carries around 67 components.

75% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.

The most starred is QI Charger by drewsum.

Parts used alongside the AT42QT1010-TSHR

Microcontrollers on boards using the AT42QT1010-TSHR

AT42QT1010-TSHR: common questions

Where can I find a AT42QT1010-TSHR reference design?

Each of the 9 boards on this page is a real design using the AT42QT1010-TSHR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the AT42QT1010-TSHR SNSK pin connected?

The SNSK pin has a series capacitor on 7 of 8 designs, most often 10 nF (then 22 nF). Counted from the KiCad layouts of 8 open source designs using the AT42QT1010-TSHR.

How is the AT42QT1010-TSHR SNS pin connected?

The SNS pin has a series capacitor on 7 of 8 designs, most often 10 nF (then 22 nF). Counted from the KiCad layouts of 8 open source designs using the AT42QT1010-TSHR.

What decoupling capacitors do designs use on the AT42QT1010-TSHR VDD pin?

The VDD pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 8 open source designs using the AT42QT1010-TSHR.

What parts are used alongside the AT42QT1010-TSHR?

The DS1683, LTC4316DD and TCA9555RGER appear in the most repositories here.

Which microcontrollers do boards using the AT42QT1010-TSHR use?

Most are built on ESP32 (2), PIC (1) and RISC-V (1).

How big is a typical board using the AT42QT1010-TSHR?

The median is 160.1 × 54 mm, and 75% are two-layer designs.

What is the most popular open source board using the AT42QT1010-TSHR?

By GitHub stars, QI Charger by drewsum, with 20 stars.

Can I simulate one of these boards using the AT42QT1010-TSHR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part