4 open source boards using the DIP-14_W7.62mm
Real designs built with the DIP-14_W7.62mm, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SYM-1
JPLeRouzic
271.5 × 206.5 mm182 parts2LMIT2
Sym-1-fidel (workfile)
271.5 × 206.5 mm181 parts2LMIT2
Sym-1-fidel (v13)
260.8 × 192.8 mm144 parts2LMIT2
Video
ddanila
100 × 100 mm46 parts4LNo license1
The DIP-14_W7.62mm in open source designs
The gallery holds 4 open source boards using the DIP-14_W7.62mm from 2 GitHub repositories; a typical one measures about 266.2 × 199.6 mm and carries around 163 components.
75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is SYM-1 by JPLeRouzic.
Parts used alongside the DIP-14_W7.62mm
What boards using the DIP-14_W7.62mm are built for
DIP-14_W7.62mm: common questions
Where can I find a DIP-14_W7.62mm reference design?
Each of the 4 boards on this page is a real design using the DIP-14_W7.62mm. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the DIP-14_W7.62mm?
The median is 266.2 × 199.6 mm, and 75% are two-layer designs.
What is the most popular open source board using the DIP-14_W7.62mm?
By GitHub stars, SYM-1 by JPLeRouzic, with 2 stars.
Can I simulate one of these boards using the DIP-14_W7.62mm before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.