2 open source boards using the EMC2301
Real designs built with the EMC2301, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350CM4ClusterHat
will127534
87.3 × 56.7 mm240 parts4LMIT95
Raspberry PiHexa-Pi
rickcox
150 × 150 mm352 parts4LCC-BY-4.00
The EMC2301 in open source designs
The gallery holds 2 open source boards using the EMC2301 from 2 GitHub repositories; a typical one measures about 118.7 × 103.3 mm and carries around 296 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is CM4ClusterHat by will127534.
Microcontrollers on boards using the EMC2301
What boards using the EMC2301 are built for
EMC2301: common questions
Where can I find a EMC2301 reference design?
Each of the 2 boards on this page is a real design using the EMC2301. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the EMC2301 use?
Most are built on Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the EMC2301?
The median is 118.7 × 103.3 mm, and 0% are two-layer designs.
What is the most popular open source board using the EMC2301?
By GitHub stars, CM4ClusterHat by will127534, with 95 stars.
Can I simulate one of these boards using the EMC2301 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.