1 open source board using the ESP32-C6-WROOM-1
Real designs built with the ESP32-C6-WROOM-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
mincrmatt12The ESP32-C6-WROOM-1 in open source designs
The gallery holds 1 open source boards using the ESP32-C6-WROOM-1 from 1 GitHub repository; a typical one measures about 136.3 × 71.1 mm and carries around 160 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Mainboard by mincrmatt12.
Microcontrollers on boards using the ESP32-C6-WROOM-1
What boards using the ESP32-C6-WROOM-1 are built for
ESP32-C6-WROOM-1: common questions
Where can I find a ESP32-C6-WROOM-1 reference design?
Each of the 1 boards on this page is a real design using the ESP32-C6-WROOM-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ESP32-C6-WROOM-1 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the ESP32-C6-WROOM-1?
The median is 136.3 × 71.1 mm, and 0% are two-layer designs.
What is the most popular open source board using the ESP32-C6-WROOM-1?
By GitHub stars, Mainboard by mincrmatt12, with 11 stars.
Can I simulate one of these boards using the ESP32-C6-WROOM-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.