1 open source board using the EVA-7M or EVA-M8
Real designs built with the EVA-7M or EVA-M8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
DL7ADThe EVA-7M or EVA-M8 in open source designs
The gallery holds 1 open source boards using the EVA-7M or EVA-M8 from 1 GitHub repository; a typical one measures about 23 × 50 mm and carries around 119 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Pecanpico10 by DL7AD.
Microcontrollers on boards using the EVA-7M or EVA-M8
What boards using the EVA-7M or EVA-M8 are built for
EVA-7M or EVA-M8: common questions
Where can I find a EVA-7M or EVA-M8 reference design?
Each of the 1 boards on this page is a real design using the EVA-7M or EVA-M8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the EVA-7M or EVA-M8 use?
Most are built on STM32 (1).
How big is a typical board using the EVA-7M or EVA-M8?
The median is 23 × 50 mm, and 100% are two-layer designs.
What is the most popular open source board using the EVA-7M or EVA-M8?
By GitHub stars, Pecanpico10 by DL7AD, with 41 stars.
Can I simulate one of these boards using the EVA-7M or EVA-M8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.