2 open source boards using the INA199A1DCKR
Real designs built with the INA199A1DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAHermes-Lite 2.0
softerhardware
100 × 100 mm488 parts4LNo license372
ProPrj BLDCcontroller 2025-09-27
BrookDawn
40 × 40 mm53 parts4LNo license0
The INA199A1DCKR in open source designs
The gallery holds 2 open source boards using the INA199A1DCKR from 2 GitHub repositories; a typical one measures about 70 × 70 mm and carries around 271 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Hermes-Lite 2.0 by softerhardware.
Microcontrollers on boards using the INA199A1DCKR
What boards using the INA199A1DCKR are built for
INA199A1DCKR: common questions
Where can I find a INA199A1DCKR reference design?
Each of the 2 boards on this page is a real design using the INA199A1DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA199A1DCKR use?
Most are built on FPGA (1).
How big is a typical board using the INA199A1DCKR?
The median is 70 × 70 mm, and 0% are two-layer designs.
What is the most popular open source board using the INA199A1DCKR?
By GitHub stars, Hermes-Lite 2.0 by softerhardware, with 372 stars.
Can I simulate one of these boards using the INA199A1DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.