5 open source boards using the INA213AIDCKR
Real designs built with the INA213AIDCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Solar Project Rev1
Phil-CIA
100 × 99.9 mm171 parts4LNo license0
ESP32Solar Project Rev0 - Manufactured First Build
100 × 99.9 mm157 parts4LNo license0
ESP32Solar Project Rev1 - 2026-07-27 PCB Baseline
100 × 99.9 mm157 parts4LNo license0
ESP32Solar Project PreRoute save
100 × 100 mm155 parts2LNo license0
Interface board
TrendBit
65 × 56 mm121 parts2LGPL-3.00
The INA213AIDCKR in open source designs
The gallery holds 5 open source boards using the INA213AIDCKR from 2 GitHub repositories; a typical one measures about 100 × 99.9 mm and carries around 157 components.
60% use four copper layers or more, and 20% carry an open source license.
The most starred is Solar Project Rev1 by Phil-CIA.
Microcontrollers on boards using the INA213AIDCKR
What boards using the INA213AIDCKR are built for
INA213AIDCKR: common questions
Where can I find a INA213AIDCKR reference design?
Each of the 5 boards on this page is a real design using the INA213AIDCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA213AIDCKR use?
Most are built on ESP32 (4).
How big is a typical board using the INA213AIDCKR?
The median is 100 × 99.9 mm, and 40% are two-layer designs.
What is the most popular open source board using the INA213AIDCKR?
By GitHub stars, Solar Project Rev1 by Phil-CIA, with 0 stars.
Can I simulate one of these boards using the INA213AIDCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.