3 open source boards using the L7912CV
Real designs built with the L7912CV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MFOS Wall-Wart PSU (Eurorack)
ckarcz
80 × 100 mm46 parts2LMIT0
Cvbs effects
44.5 × 39.5 mm25 parts2LMIT0- schematic only · 29 parts
Cvbs decomposer
29 parts2LMIT0
The L7912CV in open source designs
The gallery holds 3 open source boards using the L7912CV from 1 GitHub repository; a typical one measures about 62.3 × 69.8 mm and carries around 29 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is MFOS Wall-Wart PSU (Eurorack) by ckarcz.
What boards using the L7912CV are built for
L7912CV: common questions
Where can I find a L7912CV reference design?
Each of the 3 boards on this page is a real design using the L7912CV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the L7912CV?
The median is 62.3 × 69.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the L7912CV?
By GitHub stars, MFOS Wall-Wart PSU (Eurorack) by ckarcz, with 0 stars.
Can I simulate one of these boards using the L7912CV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.