5 open source boards using the LM324DT
Real designs built with the LM324DT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Thermostat pico
kelvie
50 × 36 mm44 parts2LApache-2.04
Hvac controller v3
50 × 30 mm41 parts2LApache-2.04
ACC BMSslave
NTURacingTeam
200 × 50 mm302 parts4LNo license4
ESP32Thermostat
52.5 × 95 mm33 parts2LApache-2.04
Magnetic sensor board
Benjamin-girard-1
65 × 42 mm114 parts4LNo license0
The LM324DT in open source designs
The gallery holds 5 open source boards using the LM324DT from 3 GitHub repositories; a typical one measures about 52.5 × 42 mm and carries around 44 components.
60% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is ACC BMSslave by NTURacingTeam.
Microcontrollers on boards using the LM324DT
What boards using the LM324DT are built for
LM324DT: common questions
Where can I find a LM324DT reference design?
Each of the 5 boards on this page is a real design using the LM324DT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM324DT use?
Most are built on ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the LM324DT?
The median is 52.5 × 42 mm, and 60% are two-layer designs.
What is the most popular open source board using the LM324DT?
By GitHub stars, ACC BMSslave by NTURacingTeam, with 4 stars.
Can I simulate one of these boards using the LM324DT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.