9 open source boards using the LM324DT

Real designs built with the LM324DT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the LM324DT

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LM324DT connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT1 pin has a series resistor on 6 of 7 designs, most often 100 Ω (then 68 kΩ).
  • The - pins have a series resistor on 6 of 7 designs, most often 100 Ω (then 68 kΩ).
  • The OUT2 pin has a series resistor on 6 of 7 designs, most often 100 Ω (then 68 kΩ).
  • The V+_8 pin has a series resistor on 5 of 7 designs, most often 100 Ω (then 18 kΩ).
OUT1pin 1Connected to: Signal 86%
  • Series resistor on 86% · 100 Ω (2), 68 kΩ (1), 1 MΩ (1)
-pin 2, 6, 9, 13Connected to: Signal 85%
  • Series resistor on 86% · 100 Ω (8), 68 kΩ (3), 3.3 kΩ (3)
  • Resistor to GND on 43% · 33 kΩ (3), 8.2 kΩ (1), 49.9 kΩ (1)
+pin 3, 5, 10, 12Connected to: CD4051B 31% · 2.5V 19%
  • Series resistor on 43% · 1 kΩ (4), 100 kΩ (3), 1.1 kΩ (2)
  • Capacitor to GND on 43% · 1 µF (2), 4.7 µF (1), 47 nF (1)
V+pin 4Connected to: VREG 71%
  • Decoupling capacitor on 43% · 1 µF (4), 100 nF (1)
OUT2pin 7Connected to: Signal 86%
  • Series resistor on 86% · 100 Ω (2), 68 kΩ (1), 430 kΩ (1)
V+_8pin 8Connected to: Signal 71%
  • Series resistor on 71% · 100 Ω (3), 18 kΩ (1), 1 MΩ (1)
V-pin 11Connected to: GND 83% · a signal 17%
OUT4pin 14Connected to: Signal 83% · not connected 17%
  • Series resistor on 83% · 100 Ω (2), 18 kΩ (1), 430 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hvac controller v3 by kelvie, ACC BMSslave by NTURacingTeam, Magnetic sensor board by Benjamin-girard-1 and Panel by directionizer.

The LM324DT in open source designs

The gallery holds 9 open source boards using the LM324DT from 7 GitHub repositories; a typical one measures about 80 × 50 mm and carries around 114 components.

67% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is ACC BMSslave by NTURacingTeam.

Microcontrollers on boards using the LM324DT

What boards using the LM324DT are built for

LM324DT: common questions

Where can I find a LM324DT reference design?

Each of the 9 boards on this page is a real design using the LM324DT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LM324DT OUT1 pin?

The OUT1 pin has a series resistor on 6 of 7 designs, most often 100 Ω (then 68 kΩ). Counted from the KiCad layouts of 7 open source designs using the LM324DT.

What resistor goes on the LM324DT - pin?

The - pins have a series resistor on 6 of 7 designs, most often 100 Ω (then 68 kΩ). Counted from the KiCad layouts of 7 open source designs using the LM324DT.

What resistor goes on the LM324DT OUT2 pin?

The OUT2 pin has a series resistor on 6 of 7 designs, most often 100 Ω (then 68 kΩ). Counted from the KiCad layouts of 7 open source designs using the LM324DT.

What parts are used alongside the LM324DT?

The ADBMS1818ASWAZ-R7, CD4051B, LT8631IFE#PBF and NX2301P,215 appear in the most repositories here.

Which microcontrollers do boards using the LM324DT use?

Most are built on ESP32 (2), AVR/Arduino (1) and RP2040/RP2350 (1).

How big is a typical board using the LM324DT?

The median is 80 × 50 mm, and 67% are two-layer designs.

What is the most popular open source board using the LM324DT?

By GitHub stars, ACC BMSslave by NTURacingTeam, with 4 stars.

Can I simulate one of these boards using the LM324DT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part