3 open source boards using the LVT125
Real designs built with the LVT125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiPowerBook
BlueSCSI
74.5 × 56.3 mm78 parts2LGPL-3.0449
BlueSCSI V2, Centronics 50 Pin, 2024.03a
59.9 × 82.5 mm71 parts2LGPL-3.0449
DB25 External
49 × 53.2 mm62 parts2LGPL-3.0449
The LVT125 in open source designs
The gallery holds 3 open source boards using the LVT125 from 1 GitHub repository; a typical one measures about 59.9 × 56.3 mm and carries around 71 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is PowerBook by BlueSCSI.
Microcontrollers on boards using the LVT125
LVT125: common questions
Where can I find a LVT125 reference design?
Each of the 3 boards on this page is a real design using the LVT125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LVT125 use?
Most are built on Raspberry Pi (1).
How big is a typical board using the LVT125?
The median is 59.9 × 56.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the LVT125?
By GitHub stars, PowerBook by BlueSCSI, with 449 stars.
Can I simulate one of these boards using the LVT125 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.