3 open source boards using the MC79M05
Real designs built with the MC79M05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Diego 500 5 slot
CRG-Glen
195 × 140 mm131 parts4LCERN-OHL-S-2.025
Diego 500 3 slot
155 × 140 mm126 parts4LCERN-OHL-S-2.025
Diego Checkmate
275 × 95 mm126 parts4LCERN-OHL-S-2.025
The MC79M05 in open source designs
The gallery holds 3 open source boards using the MC79M05 from 1 GitHub repository; a typical one measures about 195 × 140 mm and carries around 126 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Diego 500 5 slot by CRG-Glen.
MC79M05: common questions
Where can I find a MC79M05 reference design?
Each of the 3 boards on this page is a real design using the MC79M05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the MC79M05?
The median is 195 × 140 mm, and 0% are two-layer designs.
What is the most popular open source board using the MC79M05?
By GitHub stars, Diego 500 5 slot by CRG-Glen, with 25 stars.
Can I simulate one of these boards using the MC79M05 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.