8 open source boards using the MCP1700-3302E_TO92
Real designs built with the MCP1700-3302E_TO92, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PICTerminal
petrohi
101.6 × 38.1 mm30 parts2LBSD-3-Clause93
AVR/ArduinoArduino aprs tracker
billygr
70 × 55 mm21 parts2LNo license75
ESP8266ESP Attiny 1614
tomtor
33.1 × 23.9 mm18 parts2LGPL-3.04
Tinyfs
sittner
69.9 × 96.1 mm37 parts2LGPL-3.03
ESP32Lora node esp32 smd
Christophe45
54.6 × 94 mm26 parts2LNo license14
ESP8266ESPTiny
33 × 26.4 mm16 parts2LGPL-3.04
ESP32Sansnom
54.6 × 94 mm26 parts2LNo license14
ESP32Lora node esp32
48.3 × 88.9 mm22 parts2LNo license14
The MCP1700-3302E_TO92 in open source designs
The gallery holds 8 open source boards using the MCP1700-3302E_TO92 from 5 GitHub repositories; a typical one measures about 54.6 × 72 mm and carries around 24 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Terminal by petrohi.
Parts used alongside the MCP1700-3302E_TO92
Microcontrollers on boards using the MCP1700-3302E_TO92
What boards using the MCP1700-3302E_TO92 are built for
MCP1700-3302E_TO92: common questions
Where can I find a MCP1700-3302E_TO92 reference design?
Each of the 8 boards on this page is a real design using the MCP1700-3302E_TO92. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP1700-3302E_TO92 use?
Most are built on ESP32 (3), ESP8266 (2), AVR/Arduino (1) and PIC (1).
How big is a typical board using the MCP1700-3302E_TO92?
The median is 54.6 × 72 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP1700-3302E_TO92?
By GitHub stars, Terminal by petrohi, with 93 stars.
Can I simulate one of these boards using the MCP1700-3302E_TO92 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.