1 open source board using the Microchip USB2422-I/MJ
Real designs built with the Microchip USB2422-I/MJ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Grim-RaidThe Microchip USB2422-I/MJ in open source designs
The gallery holds 1 open source boards using the Microchip USB2422-I/MJ from 1 GitHub repository; a typical one measures about 54 × 92.8 mm and carries around 83 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Timepix RSS Schematic by Grim-Raid.
Microcontrollers on boards using the Microchip USB2422-I/MJ
Microchip USB2422-I/MJ: common questions
Where can I find a Microchip USB2422-I/MJ reference design?
Each of the 1 boards on this page is a real design using the Microchip USB2422-I/MJ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Microchip USB2422-I/MJ use?
Most are built on Raspberry Pi (1).
How big is a typical board using the Microchip USB2422-I/MJ?
The median is 54 × 92.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the Microchip USB2422-I/MJ?
By GitHub stars, Timepix RSS Schematic by Grim-Raid, with 0 stars.
Can I simulate one of these boards using the Microchip USB2422-I/MJ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.