4 open source boards using the MP6600GR-Z
Real designs built with the MP6600GR-Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoUA4C-vC5
turboedge
100 × 99.8 mm213 parts2LGPL-2.0107
AVR/ArduinoOcelot vA3
80 × 99.8 mm206 parts2LGPL-2.0107
AVR/ArduinoUnderdog
100 × 99.8 mm202 parts2LGPL-2.0107
AVR/ArduinoNO2C
99.4 × 53.7 mm78 parts2LGPL-2.0107
The MP6600GR-Z in open source designs
The gallery holds 4 open source boards using the MP6600GR-Z from 1 GitHub repository; a typical one measures about 99.7 × 99.8 mm and carries around 204 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is UA4C-vC5 by turboedge.
Microcontrollers on boards using the MP6600GR-Z
What boards using the MP6600GR-Z are built for
MP6600GR-Z: common questions
Where can I find a MP6600GR-Z reference design?
Each of the 4 boards on this page is a real design using the MP6600GR-Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MP6600GR-Z use?
Most are built on AVR/Arduino (4).
How big is a typical board using the MP6600GR-Z?
The median is 99.7 × 99.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the MP6600GR-Z?
By GitHub stars, UA4C-vC5 by turboedge, with 107 stars.
Can I simulate one of these boards using the MP6600GR-Z before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.