1 open source board using the MS5607-02BA03
Real designs built with the MS5607-02BA03, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
waterloo-rocketryThe MS5607-02BA03 in open source designs
The gallery holds 1 open source boards using the MS5607-02BA03 from 1 GitHub repository; a typical one measures about 56.9 × 61.3 mm and carries around 99 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is PropulsionBoard by waterloo-rocketry.
Microcontrollers on boards using the MS5607-02BA03
What boards using the MS5607-02BA03 are built for
MS5607-02BA03: common questions
Where can I find a MS5607-02BA03 reference design?
Each of the 1 boards on this page is a real design using the MS5607-02BA03. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MS5607-02BA03 use?
Most are built on PIC (1).
How big is a typical board using the MS5607-02BA03?
The median is 56.9 × 61.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the MS5607-02BA03?
By GitHub stars, PropulsionBoard by waterloo-rocketry, with 14 stars.
Can I simulate one of these boards using the MS5607-02BA03 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.