2 open source boards using the OPA134
Real designs built with the OPA134, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 65 partsNXP
Open source potentiostat
samueloblenes
65 partsCERN-OHL-S-2.00 
NXPBoards
hallmar
40.1 × 109.7 mm91 parts2LNo license21
The OPA134 in open source designs
The gallery holds 2 open source boards using the OPA134 from 2 GitHub repositories; a typical one measures about 40.1 × 109.7 mm and carries around 78 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Boards by hallmar.
Microcontrollers on boards using the OPA134
What boards using the OPA134 are built for
OPA134: common questions
Where can I find a OPA134 reference design?
Each of the 2 boards on this page is a real design using the OPA134. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OPA134 use?
Most are built on NXP (2).
How big is a typical board using the OPA134?
The median is 40.1 × 109.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the OPA134?
By GitHub stars, Boards by hallmar, with 21 stars.
Can I simulate one of these boards using the OPA134 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.