3 open source boards using the PE4259-63
Real designs built with the PE4259-63, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Shipwrecked
mpkendall
61.8 × 79.6 mm141 parts4LUnlicense17
NXPVswr meter
F6ITU
65 × 70 mm64 parts4LNo license3
ESP32Slate113-mk1
xeno3dev
96.7 × 67.8 mm609 parts8LCC-BY-NC-4.02
The PE4259-63 in open source designs
The gallery holds 3 open source boards using the PE4259-63 from 3 GitHub repositories; a typical one measures about 65 × 70 mm and carries around 141 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is Shipwrecked pcb by mpkendall.
Microcontrollers on boards using the PE4259-63
What boards using the PE4259-63 are built for
PE4259-63: common questions
Where can I find a PE4259-63 reference design?
Each of the 3 boards on this page is a real design using the PE4259-63. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the PE4259-63 use?
Most are built on ESP32 (1), NXP (1) and RP2040/RP2350 (1).
How big is a typical board using the PE4259-63?
The median is 65 × 70 mm, and 0% are two-layer designs.
What is the most popular open source board using the PE4259-63?
By GitHub stars, Shipwrecked pcb by mpkendall, with 17 stars.
Can I simulate one of these boards using the PE4259-63 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.