6 open source boards using the plot_v1
Real designs built with the plot_v1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 35 parts
32-bit-SRAM-
inderjit303
35 partsGPL-3.010 - schematic only · 102 parts
Cmos ann
Nalinkumar2002
102 partsNo license3 - schematic only · 26 parts
4-bit Flash ADC
BALAKRISHNA-EPPILI
26 partsApache-2.02 - schematic only · 42 parts
Design of-Delta sigma modulator using eSim and-Sky130
ashwini0921
42 partsNo license1 - schematic only · 34 parts
IMPLEMENTATION-OF-HIGH-SPEED-3-BIT-FLASH-TYPE-ADC
akash-ambekar
34 partsNo license1 - schematic only · 17 parts
8-Bit-Counter-Ramp-Type-ADC-using eSim
Ravi-Prakash99
17 partsNo license1
The plot_v1 in open source designs
The gallery holds 6 open source boards using the plot_v1 from 6 GitHub repositories; carries around 35 components.
33% carry an open source license.
The most starred is 32-bit-SRAM- by inderjit303.
Parts used alongside the plot_v1
plot_v1: common questions
Where can I find a plot_v1 reference design?
Each of the 6 boards on this page is a real design using the plot_v1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the plot_v1?
The adc_bridge_8, dac_bridge_3 and dac_bridge_8 appear in the most repositories here.
What is the most popular open source board using the plot_v1?
By GitHub stars, 32-bit-SRAM- by inderjit303, with 10 stars.
Can I simulate one of these boards using the plot_v1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.