2 open source boards using the REG113NA-3.3_250
Real designs built with the REG113NA-3.3_250, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32QUarkNano 9250 UC4H
ukmook
21.5 × 30 mm61 parts4LCC-BY-SA-4.010
STM32QUarkNano 9250
21.5 × 30 mm60 parts4LCC-BY-SA-4.010
The REG113NA-3.3_250 in open source designs
The gallery holds 2 open source boards using the REG113NA-3.3_250 from 1 GitHub repository; a typical one measures about 21.5 × 30 mm and carries around 61 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is QUarkNano 9250 UC4H by ukmook.
Microcontrollers on boards using the REG113NA-3.3_250
What boards using the REG113NA-3.3_250 are built for
REG113NA-3.3_250: common questions
Where can I find a REG113NA-3.3_250 reference design?
Each of the 2 boards on this page is a real design using the REG113NA-3.3_250. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the REG113NA-3.3_250 use?
Most are built on STM32 (2).
How big is a typical board using the REG113NA-3.3_250?
The median is 21.5 × 30 mm, and 0% are two-layer designs.
What is the most popular open source board using the REG113NA-3.3_250?
By GitHub stars, QUarkNano 9250 UC4H by ukmook, with 10 stars.
Can I simulate one of these boards using the REG113NA-3.3_250 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.