1 open source board using the REG710NA-3.3/250
Real designs built with the REG710NA-3.3/250, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
aerolinkersThe REG710NA-3.3/250 in open source designs
The gallery holds 1 open source boards using the REG710NA-3.3/250 from 1 GitHub repository; a typical one measures about 36 × 36 mm and carries around 105 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Aerolinkers hw by aerolinkers.
Microcontrollers on boards using the REG710NA-3.3/250
What boards using the REG710NA-3.3/250 are built for
REG710NA-3.3/250: common questions
Where can I find a REG710NA-3.3/250 reference design?
Each of the 1 boards on this page is a real design using the REG710NA-3.3/250. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the REG710NA-3.3/250 use?
Most are built on Nordic nRF (1).
How big is a typical board using the REG710NA-3.3/250?
The median is 36 × 36 mm, and 0% are two-layer designs.
What is the most popular open source board using the REG710NA-3.3/250?
By GitHub stars, Aerolinkers hw by aerolinkers, with 1 stars.
Can I simulate one of these boards using the REG710NA-3.3/250 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.