4 open source boards using the SHT30-DIS
Real designs built with the SHT30-DIS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Terrarium Control Board
justbuchanan
140 × 140 mm51 parts2LApache-2.0270
ESP32Aqm envcity hw
MateusMaruzka
100 × 100 mm132 parts2LNo license2
STM32Iot risk logger stm32l4
polesskiy-dev
55 × 45 mm42 parts2LNo license2
ESP32Bobbycar boardcomputer reinvented
bobbycar-reinvented
52 × 75 mm141 parts2LGPL-3.01
The SHT30-DIS in open source designs
The gallery holds 4 open source boards using the SHT30-DIS from 4 GitHub repositories; a typical one measures about 77.5 × 87.5 mm and carries around 92 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Terrarium Control Board by justbuchanan.
Parts used alongside the SHT30-DIS
What boards using the SHT30-DIS are built for
SHT30-DIS: common questions
Where can I find a SHT30-DIS reference design?
Each of the 4 boards on this page is a real design using the SHT30-DIS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SHT30-DIS use?
Most are built on ESP32 (3) and STM32 (1).
How big is a typical board using the SHT30-DIS?
The median is 77.5 × 87.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the SHT30-DIS?
By GitHub stars, Terrarium Control Board by justbuchanan, with 270 stars.
Can I simulate one of these boards using the SHT30-DIS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.