1 open source board using the SN74LVC125AIPWREP
Real designs built with the SN74LVC125AIPWREP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
niklasekstromThe SN74LVC125AIPWREP in open source designs
The gallery holds 1 open source boards using the SN74LVC125AIPWREP from 1 GitHub repository; a typical one measures about 39.2 × 26.5 mm and carries around 34 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Spider by niklasekstrom.
Microcontrollers on boards using the SN74LVC125AIPWREP
What boards using the SN74LVC125AIPWREP are built for
SN74LVC125AIPWREP: common questions
Where can I find a SN74LVC125AIPWREP reference design?
Each of the 1 boards on this page is a real design using the SN74LVC125AIPWREP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC125AIPWREP use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the SN74LVC125AIPWREP?
The median is 39.2 × 26.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC125AIPWREP?
By GitHub stars, Spider by niklasekstrom, with 3 stars.
Can I simulate one of these boards using the SN74LVC125AIPWREP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.