3 open source boards using the SR1010
Real designs built with the SR1010, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32IngestibleCapsule-Board v2
kjpeng
35 × 55 mm57 parts2LNo license0
STM32IngestibleCapsule-Board larger vias
15 × 15 mm51 parts2LNo license0
STM32IngestibleCapsule-Board whole
37.4 × 54.2 mm47 parts2LNo license0
The SR1010 in open source designs
The gallery holds 3 open source boards using the SR1010 from 1 GitHub repository; a typical one measures about 35 × 54.2 mm and carries around 51 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is IngestibleCapsule-Board v2 by kjpeng.
Microcontrollers on boards using the SR1010
SR1010: common questions
Where can I find a SR1010 reference design?
Each of the 3 boards on this page is a real design using the SR1010. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SR1010 use?
Most are built on STM32 (3).
How big is a typical board using the SR1010?
The median is 35 × 54.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the SR1010?
By GitHub stars, IngestibleCapsule-Board v2 by kjpeng, with 0 stars.
Can I simulate one of these boards using the SR1010 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.