3 open source boards using the STM32F072CBU6
Real designs built with the STM32F072CBU6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Neige
ymkn
257 × 57.2 mm92 parts2LMIT3
STM32Kryptonite
samienr
26.3 × 17.1 mm27 parts2LMIT2
STM32Neige PCB GLP
257 × 57.2 mm92 parts2LMIT3
The STM32F072CBU6 in open source designs
The gallery holds 3 open source boards using the STM32F072CBU6 from 2 GitHub repositories; a typical one measures about 257 × 57.2 mm and carries around 92 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Neige PCB GLP by ymkn.
Parts used alongside the STM32F072CBU6
Microcontrollers on boards using the STM32F072CBU6
What boards using the STM32F072CBU6 are built for
STM32F072CBU6: common questions
Where can I find a STM32F072CBU6 reference design?
Each of the 3 boards on this page is a real design using the STM32F072CBU6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F072CBU6 use?
Most are built on STM32 (3).
How big is a typical board using the STM32F072CBU6?
The median is 257 × 57.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the STM32F072CBU6?
By GitHub stars, Neige PCB GLP by ymkn, with 3 stars.
Can I simulate one of these boards using the STM32F072CBU6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.