2 open source boards using the STM32F401RET6
Real designs built with the STM32F401RET6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32VantageF401RE
AthulKrishnaGirish
80 × 60 mm47 parts2LNo license0- schematic only · 6 partsSTM32
Helix grounding
CARC-Program
6 partsMIT0
The STM32F401RET6 in open source designs
The gallery holds 2 open source boards using the STM32F401RET6 from 2 GitHub repositories; a typical one measures about 80 × 60 mm and carries around 27 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is VantageF401RE by AthulKrishnaGirish.
Microcontrollers on boards using the STM32F401RET6
What boards using the STM32F401RET6 are built for
STM32F401RET6: common questions
Where can I find a STM32F401RET6 reference design?
Each of the 2 boards on this page is a real design using the STM32F401RET6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F401RET6 use?
Most are built on STM32 (2).
How big is a typical board using the STM32F401RET6?
The median is 80 × 60 mm, and 100% are two-layer designs.
What is the most popular open source board using the STM32F401RET6?
By GitHub stars, VantageF401RE by AthulKrishnaGirish, with 0 stars.
Can I simulate one of these boards using the STM32F401RET6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.