6 open source boards using the TCAN332
Real designs built with the TCAN332, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32DAC ADC PWM IO
DanielMartensson
100 × 100 mm266 parts4LMIT180
STM32STM32-Ethernet-Camera
100 × 100 mm140 parts4LMIT16
STM32BMS
embeddedalpha
100 × 48 mm185 parts2LNo license6
Raspberry PiPi-Pico-NiceRF-LR2021
jlpoltrack
30 × 50 mm32 parts2LGPL-3.01
ESP32Calsol hw libs
CalSol
95.3 × 58.1 mm45 parts2LBSD-3-Clause0
STM32DAC ADC PWM IO BACK UP
100 × 100 mm266 parts4LMIT180
The TCAN332 in open source designs
The gallery holds 6 open source boards using the TCAN332 from 5 GitHub repositories; a typical one measures about 100 × 79 mm and carries around 163 components.
50% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is DAC ADC PWM IO by DanielMartensson.
Microcontrollers on boards using the TCAN332
What boards using the TCAN332 are built for
TCAN332: common questions
Where can I find a TCAN332 reference design?
Each of the 6 boards on this page is a real design using the TCAN332. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TCAN332 use?
Most are built on STM32 (4), ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the TCAN332?
The median is 100 × 79 mm, and 50% are two-layer designs.
What is the most popular open source board using the TCAN332?
By GitHub stars, DAC ADC PWM IO by DanielMartensson, with 180 stars.
Can I simulate one of these boards using the TCAN332 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.