9 open source boards using the TL16C550DPTR
Real designs built with the TL16C550DPTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoMSAP-2 rev.A
mehrantsi
240 × 1056 mm658 parts2LMIT13
AVR/ArduinoMSAP-2 rev.A SMD
178 × 711 mm658 parts2LMIT13
AVR/ArduinoMSAP-2-production
300 × 248.8 mm520 parts6LMIT13
AVR/ArduinoMSAP-2-production routed
300 × 248.8 mm520 parts6LMIT13
AVR/ArduinoPre connector model normalization v1
300 × 248.8 mm520 parts6LMIT13
AVR/ArduinoPre cpl coordinate fix v1
300 × 248.8 mm520 parts6LMIT13
AVR/ArduinoPre current source usb keepout repair v1
300 × 248.8 mm520 parts6LMIT13
AVR/ArduinoPre j5-model alignment route v1
300 × 248.8 mm520 parts6LMIT13
AVR/ArduinoMSAP-2-production source
300 × 248.8 mm375 parts6LMIT13
The TL16C550DPTR in open source designs
The gallery holds 9 open source boards using the TL16C550DPTR from 1 GitHub repository; a typical one measures about 300 × 248.8 mm and carries around 520 components.
78% use four copper layers or more, and 100% carry an open source license.
The most starred is MSAP-2 rev.A SMD by mehrantsi.
Microcontrollers on boards using the TL16C550DPTR
What boards using the TL16C550DPTR are built for
TL16C550DPTR: common questions
Where can I find a TL16C550DPTR reference design?
Each of the 9 boards on this page is a real design using the TL16C550DPTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TL16C550DPTR use?
Most are built on AVR/Arduino (9).
How big is a typical board using the TL16C550DPTR?
The median is 300 × 248.8 mm, and 22% are two-layer designs.
What is the most popular open source board using the TL16C550DPTR?
By GitHub stars, MSAP-2 rev.A SMD by mehrantsi, with 13 stars.
Can I simulate one of these boards using the TL16C550DPTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.