11 open source boards using the TPD1E10B06DPYR
Real designs built with the TPD1E10B06DPYR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Aerosense-2f r001-placement
IgorCulafic
70 × 50 mm92 parts2LAGPL-3.00
RP2040/RP2350Core io failed
70 × 50 mm92 parts2LAGPL-3.00
RP2040/RP2350Core io passed
70 × 50 mm92 parts2LAGPL-3.00
RP2040/RP2350Core local passed
70 × 50 mm92 parts2LAGPL-3.00
RP2040/RP2350Core supply passed
70 × 50 mm92 parts2LAGPL-3.00
RP2040/RP2350Display sensor passed
70 × 50 mm92 parts2LAGPL-3.00
RP2040/RP2350Fans failed
70 × 50 mm92 parts2LAGPL-3.00
RP2040/RP2350Oscillator passed
70 × 50 mm92 parts2LAGPL-3.00
RP2040/RP2350Storage failed
70 × 50 mm92 parts2LAGPL-3.00
RP2040/RP2350Storage passed
70 × 50 mm92 parts2LAGPL-3.00
RP2040/RP2350Typec state passed
70 × 50 mm92 parts2LAGPL-3.00
The TPD1E10B06DPYR in open source designs
The gallery holds 11 open source boards using the TPD1E10B06DPYR from 1 GitHub repository; a typical one measures about 70 × 50 mm and carries around 92 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Aerosense-2f r001-placement by IgorCulafic.
Microcontrollers on boards using the TPD1E10B06DPYR
What boards using the TPD1E10B06DPYR are built for
TPD1E10B06DPYR: common questions
Where can I find a TPD1E10B06DPYR reference design?
Each of the 11 boards on this page is a real design using the TPD1E10B06DPYR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPD1E10B06DPYR use?
Most are built on RP2040/RP2350 (11).
How big is a typical board using the TPD1E10B06DPYR?
The median is 70 × 50 mm, and 100% are two-layer designs.
What is the most popular open source board using the TPD1E10B06DPYR?
By GitHub stars, Aerosense-2f r001-placement by IgorCulafic, with 0 stars.
Can I simulate one of these boards using the TPD1E10B06DPYR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.